Features:
The screen uses SHARP original screen, with high quality and stability.
The screen transmittance is high, durable to use under UV light, suitable for DIY projector and SLA 3d printer.
The display area size of screen is moderate, PPI is very high, projection pixel or print accuracy are also very high.
The driver board is extremely stable, without the problem of touching the black screen and other inherent bug.
| Specificaitons |
| LCD screen |
| Brand |
SHARP |
| Model No. |
LS055R1SX03 |
| Size |
5.5 inch |
| Resolution |
2560x1440 |
| Pixel Pitch |
0.04725(W)mm*0.04725(H)mm(538ppi) |
| Module Dimensions |
70.94(W)mm*128.26(H)mm*1.35(t)mm(Excluding I/F -FPC and electronic components) |
| Active Area Dimensions |
68.04(W)mm*120.96(H)mm(5.46â€) |
| Module Dimensions |
70.94(W)mm*128.49(H)mm*1.45(t)mm |
| Color Pixel Arrangement |
RGB Vertical Stripe |
| Number of Colors |
16,777,216 Colors |
| Proportion |
9:16 |
| Weight |
25g |
| Interface |
MIPI_DSI Video mode(4-Lan x2-port) |
| Interface I/O Power supplyNote(1) |
VDDI=1.8=/-0.1V
The same voltage as “H†level of a customer’s interface signal must be supplied to VVDI |
| Power Supply Voltage |
AVDD=5.5+/-0.1V AVEE=-5.5+/-0.1 V |
| Backlight |
Light Emitting Diode(LED),14LEDs are 2 parallel,7 series connection
Backlight current:20mA/LED(typ) |
| LCD Driver IC |
(Source and Power IC: Renesas SP Driver Inc.) |
| Method of Inversion |
Column Inversion |
| Display Mode |
Transmissive Type,Normally Black Mode,In-Plane Switching Mode |
| Surface Treatment |
HC-Polarizer(Hardness:3H) |
| Driver Board |
| HDMI switch to MIPI |
| Support PC and Raspberry Pi |
Notes: When you start to use the screen, please take the back light off, here is the for your reference.
Package Included:
1x LS055R1SX03 Driver Board Kit
