1. Product features:
1. Plug in a car cigarette lighter with DC 12V to use.
2. The filter bag can be washed with water and reused.
3. Absorb dust and dry matter.
4. Under normal conditions, it can be used for half an hour and has no effect on the car's battery. If you need to use it for a long time, please start the car engine.
Second, the method of use:
1. Insert the cigarette lighter head plug into the cigarette lighter jack in the car.
2. There is a power switch control button above the handle. Push the control button to the ON position to use it. Push it to OFF to stop using it.
3. Replace the suction nozzle according to different occasions, the cigarette lighter connecting line is about 75cm long.
4. The suction port should be flat against the ground during use to achieve better results.
5. There is a front shell device key in front of the power control key. Press down to detach the front shell. When you are finished using or must clean, disassemble the front shell to clean the filter to extend the life. The filter must be kept away from eyes and ears.
6. The use of this product should not be used to inhale burning materials, such as burning cigarette butts.
Three, matters needing attention:
1. The filter must be installed when using.
2. Do not place in direct sunlight, high temperature and high pressure.
3. Do not wipe the body with gasoline or highly volatile detergent.
4. The front shell must never be taken out while the motor is rotating.
5. This product is not a toy, please do not let children play alone, so as to avoid danger.
4. Cleaning method:
â—Removal of foreign materials and filter bags:
1. Remove the foreign objects from the mesh bag, press the spring and turn the mesh bag to remove it, insert your hand into the mesh bag to remove the filter bag, and pour out the foreign objects in the filter bag.
2. Cleaning the filter bag:
a. Brush the filter bag
b. Shake the filter bag in the garbage bag
c. Clean with detergent, wipe with paper towel after cleaning, and confirm whether it is kept clean before using again.
3. Reinstall the filter bag:
Align the lower end of the filter bag with the mesh bag to install them together, so that the spring is connected to the filter bag.
â—Cleaning of plastic parts:
Use a damp cloth with hot water and a mild detergent. Avoid using other detergents that may contain chemicals to avoid damaging the plastic parts.
