Specification:
Product Name: Holder
Color: Black
Material: Plastic, Rubber
Input: DC12V-24V
Output : DC5V 2.4A
Widely compatible: works for almost all the smart phone such as iphone, Samsung etc
Widely use: works for motorcycle / electric vehicle
Extremely protective: Short-circuit / Over-current/ Over-voltage / Over-heat protection
Weight: 160g
Package box size: about 115mmx65mmx75mm (LXWXH)
Features:
--- It is waterproof and the waterproof rate is IP65.
---With Smart IC, charging faster and safer.
---The clamp arm telescopic adjustment, the maximum width is 90mm.
---Easy install and no need any tool.
---With CE FCC RoHs certificates.
How to Install:
Step1: It includes phone holder, 1M cable, and screw and rubber gasket.
Step2: Tighten the screws and put the rubber gasket inside.
holder can rotate 360 degree.
Step3: Press the button to open the holder and make phone fixed
Step4: Connect the cable to motorcycle battery.
Connect red wire to battery positive port (usually with red wire).
Connect black wire to battery negative port (usually with black wire).
Note:
1. We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm).
3. There are no instructions included in this kit.Professional Installation Is Highly Recommended.
4. Please Compare The Holder With Your Original One Before Purchasing.
Package Include:
1 x Motorcycle Charging Phone Holder
